The Command Access line of power accessories was created to enhance our existing line of electrified products. The CRU2 current reduction unit is designed to work with low current AC or DC voltage electric locking devices such as cylindrical locks, mortise locks, panic trim, or strikes that are being used in a "fail safe" condition. Once retracted, the CRU2 limits the current to the solenoid allowing it to run cooler, but delivering enough current for the solenoid to remain retracted as long as needed. Our PM200/PWM200 power booster interface modules were produced to increase the efficiency of our electric latch pullback modifications of exit devices. This products maximizes the distance available from the exit device to the power supply from 700' with 18ga wire all the way up to 1500' with 12ga wire.